Overview
The main function of TRUSTNUO Technolgoy NCP is to provide the interface between the equipment and the network management system.
With the technology of TN-OTNS series, it completes the management of each single board of the network element, various maintenance and management signal transmission, and realizes the synchronization of the equipment network element and the entire network. Real-time monitoring, maintenance and management of equipment network provides a good solution for equipment monitoring.
Features
- High-speed ARM processor is used to provide powerful data processing capability. It can collect the status information, alarm events and performance parameters of each single card’s function module, and transform, process and store them. Meanwhile, control and management information is transmitted to other functional modules of the equipment.
- Provides a Console interface to support simulation terminal operation
- Provides two RJ45 Ethernet interfaces to support IP-based graphical SNMP network management
- Provides 3 SFP interfaces to support in-band management of equipment, realize the processing of 3 optical monitoring channels, and complete the receiving and sending of optical signals of optical monitoring channel at each station.
- The management module is hot swappable and does not affect the normal operation of current service after failure.
- Brand: TRUSTNUO
Parameter
| NCP |
| Product Part Number |
TN-NCP |
| Local management serial port |
Supports a Micro-USB local management serial port |
| Remote management Ethernet port |
Supports two RJ45 Ethernet interfaces, interface rate 10/100/1000M adaptive |
| OSC optical monitoring port |
Supports three pluggable optical SFP ports with LC interface |
| Network management method |
Supports CLI, Telnet, SNMP, Web and other network management methods |
| Exchange function |
Supports IP communication between devices to realize integrated management |
| Protection function |
Plug out or failure of network management card will not affect existing service |
| Maintenance function |
Supports local or remote software online upgrade |
| Reset function |
Supports hardware reset of local NCP card by operating key |
| Initialization function |
Supports initialization of local NCP card hardware by operating key |
| working temperature |
-10℃~+60℃ |
| Working humidity |
5%~95% |
| Number of occupied slots |
Supports TN-OTNS full range chassis, occupying 1 slot |
| Maximum power consumption |
5W |
| MTBF |
＞100000 hours |
| Default IP address of factory |
192.168.1.100 |
